Type A pillar for road bridge cod. 1003
€10,50
Select street level height
H0 scale reproduction (1:87) faithful to the original of a pillar with 1 pier forming part of a classic Italian concrete bridge of the current era.
The pillar has 4 hooks on each side and is suitable for the bridge with 4 V-beams code 1003
Perfectly reproduced and sized thanks to FDM 3D printing technology with concrete gray PLA material, it is supplied with a cap and 1 stack to glue.
Available in the following sizes:
- Height from road level: 80 mm (real life equivalent approximately 7.00 metres) and free height of 65 mm (real life equivalent approximately 5.60 metres)
- Height from road level: 100 mm (real life equivalent approximately 8.70 metres) and free height of 85 mm (real life equivalent approximately 7.40 metres)
- Height from the floor road: 120 mm (equivalent to real life about 10.50 meters) and free height of 105 mm (equivalent to real life about 9.00 meters)
- Road surface height customizable from a minimum of 60 mm to a maximum of 140 mm
Please refer to the dimension drawing below to check the measurements. The free height is always 15 mm less than the street level height.
The item can already be used raw or can be easily worked and painted for an optimal finish.
Finish of the bioPLA material
Allegati
