Skip to content
THE 10% DISCOUNT CONTINUES UNTIL OCTOBER 20. ENTER THE CODE "DOPOFIERA10" AT CHECKOUT
Free shipping on orders over €89

Pillar for Piacenza railway viaduct - Scale H0

€11,00
SKU: 1006.PLS.H100
Select track surface height

Reproduction in H0 scale (1:87), faithful to the original, of the concrete pillar of the "Piacenza" railway viaduct , in modern style, which reproduces the viaduct built for the high-speed line near Piacenza.

Perfectly reproduced and sized thanks to FDM 3D printing technology with concrete-like gray PLA material, it is supplied in a single piece, ready to use.

Available in the following sizes:

  • Height from track surface: 100 mm (equivalent to real life approximately 8.70 metres)
  • Height from track surface : 120 mm (equivalent to real life approximately 10.50 metres)
  • Customizable from a minimum of 90 mm to a maximum of 150 mm

The item can already be used raw or can be easily worked and painted for an optimal finish.

Please check the track height as per the dimensioned drawing.

Finish of the bioPLA material

Assembly
Where assembly between the pieces is required, we recommend using cyanoacrylate glue for a quick and resistant fixing. We recommend lightly sanding the parts to be glued.

Sanding
To mitigate the streaking effect, you can roughen with 180/240 grit sandpaper and continue with finer grits, up to 1000 for the final sanding. It is recommended to moisten the sandpaper or wet the piece with cold water to avoid overheating the surface too much, as the PLA material could knead at high temperatures.
The use of power tools for sanding is not recommended.

Painting
Use acrylic products of the desired color with a matt finish (for cement, gray RAL 7035). To obtain a more uniform surface, the use of an airbrush or spray can is recommended. You can apply multiple coats until you are satisfied, leave to dry between coats.

0 / 0
Go to top Top