Skip to content
Free shipping on orders over €89

Span for Europa railway viaduct - Scale H0

SKU: 1005.TRV.L300
Select length

Reproduction in H0 scale (1:87), of the span for the "Europa" railway viaduct. Suitable for both classic and high-speed double-track lines. Modular with other articles of the Europa viaduct to lengthen it as desired (customizable sizes available).

Product of considerable dimensions, composed of 4 already assembled parts, perfectly reproduced and sized thanks to FDM 3D printing technology with concrete-like light gray PLA material, supplied in a single piece, ready for use.

Available in the following sizes:

  • Span length: 300 mm (equivalent to real life approximately 26 metres)
  • Span length: 345 mm (equivalent to real life approximately 30 metres)
  • Customizable length from a minimum of 280 mm to a maximum of 350 mm

The item can already be used raw or can be easily worked and painted for an optimal finish.

Products to complete the viaduct:

  • Parapet for bridges with a total length of 80 cm (code: 1005.PRP.L80)

Please check the track height as per the dimensioned drawing.

Finish of the bioPLA material

Where assembly between the pieces is required, we recommend using cyanoacrylate glue for a quick and resistant fixing. We recommend lightly sanding the parts to be glued.

To mitigate the streaking effect, you can roughen with 180/240 grit sandpaper and continue with finer grits, up to 1000 for the final sanding. It is recommended to moisten the sandpaper or wet the piece with cold water to avoid overheating the surface too much, as the PLA material could knead at high temperatures.
The use of power tools for sanding is not recommended.

Use acrylic products of the desired color with a matt finish (for cement, gray RAL 7035). To obtain a more uniform surface, the use of an airbrush or spray can is recommended. You can apply multiple coats until you are satisfied, leave to dry between coats.

0 / 0
Go to top Top