Span for road bridge with 7 H beams cod. 1002

Reproduction in H0 scale (1:87) of a complete span of 7 H-beams and street level slab of a classic concrete road bridge for provincial and main high-flow roads. Suitable for roads with a carriageway width of 3.25 to 3.50 meters + side shoulder and pavement.

A piece of considerable size and complexity, perfectly reproduced and sized thanks to FDM 3D printing technology with cement gray like PLA material, it is supplied in a single piece, ready to be combined with the pillars and the terminal abutment with master code 1002, obtaining a viaduct of the desired length.

The width of the bridge slab is 132 mm, available in the following length sizes:

• Span length: 253 mm (equivalent to real life approximately 22 metres)
• Span length: 287 mm (equivalent to real life approximately 25 metres)
• Span length: 310 mm (equivalent to real life approximately 27 metres)
• Customizable from a minimum of 172 mm to a maximum of 345 mm

They are included in the article:

• 2 full-length laser-engraved and laser-cut sidewalks
• 2 rows of full-length side finishing tiles
• 4 gutters 3D printed in resin

Finish

The item can already be used raw or can be easily worked and painted for an optimal finish.

Measures

Please refer to the dimensioned drawing to check the total width of the bridge (132 mm), the road surface (98 mm) and the pavements (17 mm).