Type A pillar for road bridge cod. 1202

Reproduction in N scale (1:160) faithful to the original of a pillar with 3 piles which is part of a classic Italian concrete bridge of the current era.

The pillar has 6 hooks on each side and is suitable for the bridge with 6 H beams code 1202

Perfectly reproduced and sized thanks to FDM 3D printing technology with concrete gray like PLA material, it is supplied with a cap and 3 piles to glue.

Available in the following sizes:

• Height from road level: 44 mm (equivalent to real life about 7.00 meters) and free height of 31.5 mm (equivalent to real life about 5.00 meters)
• Height from road level: 50 mm (equivalent to real life about 8.00 meters) and free height of 37.5 mm (equivalent to real life about 6.00 meters)
• Height from the floor road: 62 mm (equivalent to real life about 10.00 meters) and free height of 49.50 mm (equivalent to real life about 8.00 meters)
• Road surface height customizable from a minimum of 38 mm to a maximum of 62 mm (with free height always 12.5 mm less)

Please refer to the dimension drawing below to check the measurements.

The item can already be used raw or can be easily worked and painted for an optimal finish.