Type A pillar for road bridge cod. 1003

€10,50

Type A pillar for road bridge cod. 1003

€10,50

SKU: 1003.PLA.H80

Select street level height

80 mm

100 mm

120 mm

Personalized

H0 scale reproduction (1:87) faithful to the original of a pillar with 1 pier forming part of a classic Italian concrete bridge of the current era.

The pillar has 4 hooks on each side and is suitable for the bridge with 4 V-beams code 1003

Perfectly reproduced and sized thanks to FDM 3D printing technology with concrete gray PLA material, it is supplied with a cap and 1 stack to glue.

Available in the following sizes:

Height from road level: 80 mm (real life equivalent approximately 7.00 metres) and free height of 65 mm (real life equivalent approximately 5.60 metres)
Height from road level: 100 mm (real life equivalent approximately 8.70 metres) and free height of 85 mm (real life equivalent approximately 7.40 metres)
Height from the floor road: 120 mm (equivalent to real life about 10.50 meters) and free height of 105 mm (equivalent to real life about 9.00 meters)
Road surface height customizable from a minimum of 60 mm to a maximum of 140 mm

Please refer to the dimension drawing below to check the measurements. The free height is always 15 mm less than the street level height.

The item can already be used raw or can be easily worked and painted for an optimal finish.

Additional Information

Finish of the bioPLA material

Assembly
Where assembly between pieces is required, we recommend using cyanoacrylate glue for a quick and strong bond (Glue 21, available in the Accessories category, is perfect). We recommend lightly sanding the parts to be glued.

Sanding
Normally not necessary, but if you want to reduce the streaking effect, you can roughen with 240/320 grit sandpaper and then work your way up to finer grits, up to 1000 for the final sanding. We recommend wetting the sandpaper or wetting the piece with cold water to avoid overheating the surface, as the PLA material could become brittle at high temperatures.
The use of power tools for sanding is not recommended.

Painting
Use acrylic paints in the desired color with a matte finish (for concrete, RAL 7035 gray). For a more uniform surface, we recommend using an airbrush or spray can. You can apply multiple coats until you're satisfied, letting them dry between coats.