Type A pillar for road bridge cod. 1004
€8,50
Select street level height
H0 scale reproduction (1:87) faithful to the original of a pillar with 2 piles which is part of a classic Italian concrete bridge of the current era.
The pillar has 5 hooks on each side and is suitable for the bridge with 5 H beams code 1004
Perfectly reproduced and sized thanks to FDM 3D printing technology with concrete gray like PLA material, it is supplied with a cap and 2 piles to glue.
Available in the following sizes:
- Height from road level: 80 mm (equivalent to real life about 7.00 meters) and free height of 58 mm (equivalent to real life about 5.00 meters)
- Height from road level: 100 mm (equivalent to real life approximately 8.70 metres) and free height of 78 mm (equivalent to real life approximately 6.70 metres)
- Height from the floor road: 120 mm (equivalent to real life about 10.50 meters) and free height of 98 mm (equivalent to real life about 8.50 meters)
- Road surface height customizable from a minimum of 60 mm to a maximum of 140 mm (with free height always 22 mm less)
Please refer to the dimension drawing below to check the measurements.
The item can already be used raw or can be easily worked and painted for an optimal finish.
Finish of the bioPLA material
Allegati
